Measuring a Room for Your Wall Bed

Installing a Wallbedsonline Murphy bed is an excellent way to maximise space and enhance the functionality of any room. To ensure a seamless fit and smooth installation, it is essential to carefully measure your available space before making a purchase. The following  guide walks you through each step of the process, helping you take accurate measurements and consider every important detail.

Tools You Will Need

·      Tape measure

·      Notepaper and pen, or a tablet/notebook

·      Stud finder (optional but helpful for installation)

Step 1: Prepare the Space

·      Clear the Wall: Remove all furniture and decorations from the intended installation area to ensure a clear, unobstructed view and accurate measurements.

·      Draw a Sketch: Create a simple wall elevation and floor plan to note your measurements. The drawing does not need to be to scale but should be clear enough for easy reference later.

Step 2: Measure the Wall Width and Height

·      Wall Width: Measure from one end of the wall to the other (skirting to skirting), keeping the tape straight. Record this on your wall elevation sketch.

·      Wall Height: Measure vertically from floor to ceiling, ensuring the tape remains taut. Note this measurement on your sketch as well.

Step 3: Identify and Measure Obstructions

·      Check for Obstructions: Identify wall or ceiling fixtures, beams, windows, curtain rails, electrical points, or moldings that may impact installation.

·      Measure Obstructions: Use your tape measure to record their positions and mark these on your drawing for future reference.

Step 4: Measure the Floor Space

·      Floor Clearance: Measure from the wall to any permanent fixtures (such as built-in furniture) to determine available floor space. Note these distances on your floor plan.

·      Bed Extension: Consider how far the bed will extend into the room when open. Measure from the wall to the anticipated end point of the bed when deployed.

Step 5: Consider Other Room Factors

·      Room Access: Ensure the bed can be easily opened and closed without blocking doors, hallways, or other high-traffic areas.

·      Furniture Arrangement: Take stock of existing furniture and how it may need to be rearranged to accommodate the wall bed.

·      Additional Cabinetry: If planning to add side cabinetry, check that there is adequate space alongside your wall bed installation.

Step 6: Double-Check Your Measurements

·      Verify Accuracy: Re-measure all key dimensions to ensure accuracy and avoid costly mistakes. Measuring twice is always recommended.

·      Review Manufacturer Guidelines: Consult the specific measurement requirements provided by your wall bed manufacturer, as individual models may have unique needs.

By carefully following these steps, you'll ensure your wall bed fits perfectly and functions reliably. Keep your measurements handy when shopping for your bed to facilitate a smooth purchasing process.

Step 7: Choosing the Right Wall Bed

With your measurements complete, consider the following to select the perfect wall bed for your space:

·      Bed Size: Choose the appropriate size (Single, Double, or Queen) based on your room dimensions and sleeping needs.

·      Bed Orientation: Select a vertical or horizontal operation mechanism depending on your available wall and floor space.

·      Style: Pick a style that complements your room’s decor and meets your functional requirements. Wallbedsonline hardware kits offer the flexibility to design your customised Murphy bed.

Before making your purchase or beginning installation, always double-check all measurements for accuracy. If you are unsure at any point, consider consulting a professional installer to guarantee safe and secure installation of your wall bed.

Our Wallbedsonline team is available to answer your wall bed questions, call us on 0800 925 523, or contact us through the form below.